FieldFox Handheld Analyzer N9952A
Keysight's FieldFox portable analyzers are equipped to handle your toughest working environments during routine maintenance, in-depth troubleshooting, and anything in between. Choose the software-enabled Keysight FieldFox configuration that best meets your needs.
Configure FieldFox as a cable and antenna analyzer (CAT), handheld vector network analyzer (VNA), handheld spectrum analyzer, or an all-in-one combination analyzer.
Get frequency coverage up to 54 GHz with precision comparable to benchtop results.
Make 5G field test a reality with wide analysis bandwidth up to 120 MHz.
Capture small, interfering signals with wideband, real-time analysis.
Lightweight, portable, and rugged RF analyzer.
Product Features
| Additional CAT/VNA Based Features: | Mixed-Mode S-Parameters DTF/TDR Cable Measurements Vector Voltmeter | Additional SA Based Features: | Real-Time Spectrum Analysis Noise Figure Measurements Over-The-Air Measurements Built-In Power Meter Extended Range Transmission Analysis (ERTA) |
| Applications: | AM/FM Tune and Listen Field Strength Measurement SCPI Code Compatibility Spectrogram Stimulus Response 89600 VSA Software Over-The-Air LTE FDD and 5GTF | Bandwidth Options: | 10 MHz |
| Best Speed at 1001 Point, 1 Sweep: | 478 us/pt | Cable and Antenna Analyzer: | Yes - Standard |
| DANL @1 GHz: | -159 dBm | Form Factor: | n/a |
| Frequency: | 50 GHz | Instrument Type: | Combination Analyzer |
| Maximum Analysis Bandwidth: | 10 MHz | Maximum Frequency: | 50 GHz |
| Maximum Real-Time Bandwidth: | 10 MHz | Minimum Frequency: | 300 kHz |
| Number of Built-In Ports: | 2 ports | Output Power: | Up to 0 dBm |
| Overall Amplitude Accuracy: | ±0.3 dB | Phase Noise @1 GHz (1 MHz offset): | -113 dBc/Hz |
| Phase Noise @1 GHz (10 kHz offset): | -111 dBc/Hz | Phase Noise @1 GHz (30 kHz offset): | -108 dBc/Hz |
| Power Measurement Using USB Sensor: | Frequency-Offset CW or Swept-Frequency RF Pulse Test with Peak Sensor | SA Start Frequency: | 5 kHz |
| Spectrum Analyzer: | Yes - Optional | Standard Attenuator Range: | 30 dB |
| Standard Attenuator Step: | 5 dB | System Dynamic Range: | 110 dB |
| System Features: | GPS Receiver - Internal Only Remote Control Capability Built-In DC Source | Type: | Handheld |
| TOI @1 GHz (3rd Order Intercept): | +13 dBM | Trace Noise: | 0.004 dB |
| Vector Network Analyzer: | Yes - Optional |
